NavCom SurveCE Integration Rev.A - Manual (Page 80)

SurvCE™ Integration User Guide – Rev. A
3-78
Do not perform static data collection for the rover
GPS. If desired in the future, refer to Appendix B
Static Data Collection for instructions.

Static data is collected at the rover for
post processing to obtain a greater
precision than RTK or when outside the
radio range
of the base
Continue to the next section, GPS Utilities.
GPS Utilities
Figure 42: Equip Menu – GPS Utilities
1. Select Equip > GPS Utilities (see Figure 42). The
GPS Utilities window opens (see Figure 43).

The available GPS utilities depend on
the capabilities of the GPS. If a
StarFire™ license is not active, the
Quickstart button is not available.