NavCom SurveCE Integration Rev.A - Manual (Page 95)

SurvCE ™ Integration User Guide – Rev. A
3-93
2. Select the settings:
• Method: The desired direction and orientation
for moving the rover to a stakeout point.
• Ref. Object: Base Station
.
• Directions From: Reference Object or Rod
.
Tolerances
Operating tolerances for the stakeout point can be
configured.
Figure 53: Equip Menu – Tolerances
1. Select Equip > Tolerances to set tolerances for
data collection (see Figure 53). If the established
tolerances are exceeded, a warning displays. The
Tolerances window opens (see Figure 54).