NavCom LAND-PAK Rev.E - Manual (Page 26)

LAND-PAK
™ User Guide – Rev. E
1-24
formats. It
is capable of RTK/UltraRTK™, RTCM 2.3
and 3.0 (code and phase), RTCM 3.1, types 1001-
1012, 1019, 1020, and 1033 (Network RTK), and
CMR/CMR+ dGPS operating methods.
The receiver simultaneously accepts additional dGPS
corrections
1
(WAAS, EGNOS, MSAS, GAGAN),
assuring seamless position output.

1
Note that the Field Genius software
disables this feature by default to avoid
errors in applications where reception of
these signals is not aligned for the area
of intended satellite operation.
The robust SF-3040 housing has a female standard
5/8-inch BSW threaded mount (5/8-11 UNC) with a
depth of 16 mm (0.63 inch) for mounting on a
surveyor’s pole, tripod, mast, or any apparatus that
accepts the thread size.
The SF-3040 GNSS engine includes a digital ASIC to
handle high-speed signal processing.
The operating software is also capable of supporting
internal and external radio modems. Refer to Chapter
7 of the SF-3040 GNSS Receiver Product User Guide
for details on the removable radio modem. The
internal radio modem supports Satel, Pacific Crest,
and TrimTalk over-the-air modulation formats.
The receiver can output proprietary raw satellite
measurements and Position Velocity Time (PVT) data
as fast as 10Hz (optional) through two 115 kbps serial
ports with less than 20ms latency.
The SF-3040 is operated on internal removable
batteries or on external power. Refer to Chapter 6 of
the SF-3040 GNSS Receiver Product User Guide for
details.
 Integrated GNSS and L-Band Antenna