NavCom LAND-PAK Rev.E - Manual (Page 58)

LAND-PAK
™ User Guide – Rev. E
4-56
Item Receiver Transmitter Notes
Power
Consumption <1.2 W <3 W @ 0.5 W
output power
<7 W @ 1 W
output power
Power
Consumption,
Save Modes Sleep: 0.24
W typical
DTR: 5 mW
Transmit Power 100, 200, 500,
1000 mW Default:
100mW
Communication Half-Duplex
Carrier Power
Stability < ± 1.5 dB
Data Speed of
Serial Interface
300
– 38400 bps
Programmed
to 38400 bps
3
Modulation 4FSK (Satel), GMSK
(PacificCrest, TrimTalk)
Ant. Connector TNC
Interface LVTTL UART
Temperature
Ranges -30°C
– +65°C
Functional
-25°C
– +55°C
Complies with
standards
-40°C
– +80°C
Storage
Weight 50 g

3. Software SF-3040 v2.1.7 is limited to Satel;
Software v3.0 and later allows Satel,
PacificCrest, and TrimTalk.
Not supported in the initial release of the
FieldGenius v5.1.1.2 software (initial release).
RF Interface
The radio modem has a single antenna connector
with an impedance of 50 ohm.