Figure 1: sf-3040 connectors, detail – NavCom LAND-PAK Rev.E User Manual

Page 27

Advertising
background image

LAND-PAK

™ User Guide – Rev. E

1-25

The all-in-one housing incorporates our compact
GNSS antenna with excellent tracking performance
and a stable phase center for GPS L1 and L2. It
tracks and receives GPS (L1, L2, L2C, L5),
GLONASS (G1, G2), StarFire, and SBAS (WAAS,
EGNOS, MSAS, GAGAN) signals. The NGS
calibration table for this product is available on the
following link:

http://www.ngs.noaa.gov/ANTCAL/Antennas.jsp;jsess
ionid=3DE81666766F189AFA9D57D343082098?ma
nu=NavCom

 Communications

The SF-3040 provides two communication port
connectors. The 7-pin female LEMO connector
communication port, labeled USB-COM1, and the 6-
pin female LEMO connector communication port,
labeled COM2, are located on the bottom of the
receiver (refer to Figure 1).

POWER USB/COM1 COM2

Figure 1: SF-3040 Connectors, Detail

Each port conforms to the EIA RS-232 standard.
Available data rates are from 1.2 to 115.2kbps for the
serial ports. The USB port operates at 2.0 Mbps.

Advertising
This manual is related to the following products: