NavCom LAND-PAK Rev.E User Manual
Page 38
LAND-PAK
™ User Guide – Rev. E
1-36
static work from recorded data. StarPoint is a
complete desktop precise point positioning program
created for surveyors, contractors and engineers.
Prior to shipment, each LAND-PAK system
identification information is loaded into a master data
base where a key-code to activate the desktop
software is generated. Upon first use, the StarPoint
software must have internet access to acquire the
registration information from the master site. If
subsequent receivers are purchased, StarPoint will
need to re-access the registration site to update
registration information. StarPoint may be installed on
any number of computers and will only process
NavCom receiver data.
Refer to the supplied StarPoint User
Guide for details.
Consult the StarPoint User Guide for
instructions on installing FieldGenius.
.