NavCom LAND-PAK Rev.E - Manual (Page 63)

LAND-PAK
™ User Guide – Rev. E
4-61
Rover Test Setup
This section provides the steps to correctly and safely
set up the rover. It is important to select an open area
for the test setup.
The rover pole may damage soft
materials, including indoor carpets.
Over-tightening of the attachments on
the rover pole may cause damage.
1. Set up the rover in a safe, open, and flat location.
Figure 23: Pole Clamp and Cradle
Refer to Figure 23 for the steps below:
2. Connect the rover pole clamp to the Nautiz cradle,
if necessary:

Insert the cradle quick-release adapter into
the hole in the pole clamp.

Depress the button on the pole clamp and, if
necessary, twist the cradle to the desired
position by inserting the small peg into one of
the available holes on the pole clamp.

Release the black button on the pole clamp to
lock the assembly in place.