NavCom LAND-PAK Rev.E - Manual (Page 77)

LAND-PAK
™ User Guide – Rev. E
5-75
Configure the Internal Radio as the Data
Collector
Perform these steps to configure the LAND-PAK
1W internal radio:
1. Open FieldGenius and select a project or create a
new one (see the Field Genius User Guide for
detailed instructions).
2. On the Instrument Selection dialog box (refer to
Figure 40), select GPS Rover.

The only time you select GNSS
Reference is when you are setting up a
base station with the internal 1W or
external UHF radio boost.

If the SF-3040 is not already in the
Instrument Profile list, add it to the list
first; then edit the settings. The Rover
and Reference are handled separately.
Figure 40: Instrument Selection