NavCom LAND-PAK Rev.E - Manual (Page 65)

LAND-PAK
™ User Guide – Rev. E
4-63
turning the top pole to align the spring-loaded
clasps with the bottom pole.
6. Tighten the connector at the base of the extension
to secure the extension pole.

Extending the rover pole reduces the
possibility of satellite signal blockage by
passing pedestrians or vehicles.
7. Insert the two lithium-ion battery packs into the
SF-3040 GNSS receiver. Refer to Chapter 3
Battery Charging for details.
8. Screw the receiver antenna onto the SF-3040.
9. Mount the SF-3040 to the top of the rover pole
and screw into place.
This concludes the rover test setup. Carefully,
disassemble the rover attachments, and repack all
the equipment.