NavCom SR-7120 Rev.A - Manual (Page 40)

Safari Network User Guide
2-14
In the Ethernet mode, the Safari Network acts as an IP
host where its IP address can be configured manually, or
acquired automatically via Dynamic Host Configuration
Protocol (DHCP). It then can be addressed using IP
applications such as Ping.
To create an Ethernet service, assign a Channel to the
Ethernet service. This Channel number will be assigned to
COM1 of all radio modules that will make up the network
(see Chapter 4: Configuration).
Table 2-6 is an example of Ethernet Service and Channel
assignments for an Ethernet Wireless LAN service.
Channel
#
Service
Radio
ID
COM
Port
Tx Rx
Forward
Band-
width
Return
Band-
width
100
(NCU)
COM1 1
Ethernet
201
202
203
204
COM1 1
230.4K 230.4K
Table 2-6: Ethernet Service/Channel assignments