NavCom SR-7120 Rev.A - Manual (Page 50)

Safari Network User Guide
UP
Providing AC Power through the Port Expander
This configuration, recommended for the NCU and SCU,
requires the use of the Port Expander
with the DIN
connector for power input and the AC power supply.
1. Mount the radio unit in the selected location per your
site planning. If using the internal antenna, be sure to
mount the unit in the position shown in Figure 3-2
below, with the omni-directional radiation pattern
along the horizontal plane.
Figure 3-2: Correct Mounting Position for Internal Antenna
3-4