NavCom SR-7120 Rev.A - Manual (Page 93)

Safari Network User Guide
5-5
Deleting Network Components
Deleting a Service
1. At the Network Management menu, select:
1) Service Configuration
2. At the Service Configuration menu, select:
2) Delete Service
to delete one service setting from the service table.
You are prompted to enter the Service ID.
BE SURE TO ENTER THE CORRECT SERVICE ID TO
BE DELETED. THERE IS NO UNDO OPTION.
After the service is deleted, you are advised to perform a
Network Restart—either a software restart from the
Network Management Menu or hardware restart by
turning off and on the Port Expander. The change will not
take effect until a network restart.
Deleting All Services (Erasing the Service Table)
1. At the Network Management menu, select:
1) Service Configuration
2. At the Service Configuration menu, select:
4) Delete Service Table
and erase all service settings.
You are prompted to enter y or n to confirm that you
want to erase the service database.
Respond yes only if
you are sure that you want to erase all services.
After the Service Table is erased, you are advised to
perform a Network Restart, either a software restart from
the Network Management Menu or hardware restart by
turning off and on the Port Expander. The change will not
take effect until a network restart.