NavCom SR-7120 Rev.A - Manual (Page 64)

Safari Network User Guide
Use the provided RJ45-DB9 converter cable to
connect the COM2 port on the Port Expander that is
connected to the NCU with a COM port on your
administrative computer.
4-2
Launch a HyperTerminal program from the computer
and set the following parameters for the
HyperTerminal program:
• Baud = 57600 bps
• Data bits = 8
• Parity = NONE
• Stop bits = 1
• Flow Control = NONE
Sel: "Net Mgmt"
Sel: "NCU Config"
Config NCU
Sel: "Net Mgmt"
Sel: "SCU Config"
Config. SCU
Sel. "Net. Mgmt"
Sel. "Svc Config"
Set Up Svcs.
Sel: "Net Mgmt"
Sel: "Remote Config"
Config. Remote
Sel. "Local Config"
Config as NCU
Display
"Admin.Page"
Launch
HyperTerm
Program
Figure 4-1: Set-up Process