NavCom SR-7120 Rev.A - Manual (Page 82)

Safari Network User Guide
The following example screen shows the steps of adding
the RU 201 (ID range 101-399).
Image 4-17: Adding an RU
Repeat this process to add all RUs included in the
network. Note: Unit must be reset for changes to
take place
RU Port Configuration
At the Remote Configuration menu, select:
6) Change Port Configuration
and you will prompted to enter the Unit ID for the RU
to be configured. In our example, RU 201 is the first
unit to be configured, so enter 201 and return.
Then you will be prompted to select a port to
configure: COM1, COM2, COM3. In our example,
COM1 is selected first for configuration.
After you select a port to configure, you are
prompted to select the protocol for the port to
communicate with the computer or other
communication device. Options are different
depending on the port selected. You can follow the
on-screen prompt. In our example, COM1 is assigned
for Ethernet and COM2 is assigned for Asynch.
4-20