Quintum Technologies Tenor AS - Manual (Page 34)

P/N 480-0059-00-10 2-11
RJ-45 Cables
RJ-45 cable connector pinouts are given in this section to help you identify the proper connector to
accommodate your specific networking requirements. The RJ-45 (ISO 8877) connector is the EIA/
TIA standard for Unshielded Twisted Pair (UTP) cable; the wiring color codes are UTP Standard
Coloring. The pin order is shown in Figure 2-1.
Figure 2-1 RJ-45 Pin Order
RJ-45 Ethernet Cable (10/100)
An RJ-45 (10/100BaseT) straight through shielded cable is used to connect Tenor AS to an Ethernet
LAN. Cable pinouts are listed in Table 2-1. Color specifications are applicable to the RJ-45 cable
provided.
Figure 2-2 RJ-45 (10/100BT) Connector Pinouts
Table 2-1 RJ-45 (10/100BT) Connector Pinouts
Pin # Signal Definition Color
1 TX + Transmit Data White w/orange
2 TX - Transmit Data Orange
3 RX + Receive Data White w/green
4 Unused Unused Blue
5 Unused Unused White w/blue
6 RX - Receive Data Green
7 Unused Unused White w/Brown
8 Unused Unused Brown
8
1
1
8
Side View
Top View
Pin # Connects to Pin #
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8