Teac DR-V1HD - Manual (Page 19)

TASCAM DR-V1HD
19
2 – Names and Functions of Parts
3 Image resolution indicator
This shows the image resolution.
Indicator Meaning
None Audio mode, no captured still photo
0.3M Audio mode with 640x480 captured still photo
0.9M Audio mode with 1280x720 captured still photo
SD-VGA Video mode at SD resolution
HD-720p Video mode at HD resolution
4 Playback speed setting
Shows the current playback speed (0.5–1.5).
Examples : SPEED 0.5
SPEED 1.5
5 Power supply status
A battery icon appears when the unit is powered by batteries.
When batteries are being used, the icon shows the amount of power
remaining in bars( , , ).
When the icon starts flashing, the batteries are almost dead and the
power will turn off soon. If the icon starts flashing during recording
(audio/video), the unit will end recording and power off.
When the unit is being powered by a TASCAM PS-P520 AC adaptor (sold
separately), will be displayed.
NOTE
Sometimes a Battery empty warning appears when recording (audio/video)
or conducting other demanding operations even when some battery power
still remains.
6 Operation indicator
This icon shows the operation status
: Stopped
: Paused
: Playing back
: Searching forward
: Searching backward
7 IN-OUT loop playback/repeat playback/divide mode setting
indicator
None : No repeat or loop function active
: Repeat playback ON
Selected area is played back repeatedly.
: Single repeat playback ON
Selected file is played back repeatedly.
: IN/OUT loop playback ON
Area between IN (start) and OUT (end) points are played
back repeatedly in a loop.
: Divide mode
Only selected file is played back repeatedly.