Teac DR-V1HD - Manual (Page 77)

はじめに
はじめに
TASCAM DR-V1HD
77
9 – Connecting with a computer
By connecting this unit to a computer using a USB cable, you can transfer
video, photo and audio files between the microSD card in the unit and the
computer.
This unit can use files with the following formats.
Video
MOV: SD and HD files recorded (video/audio) by a DR-V1HD
Audio
WAV: 16 or 24-bit WAV with 44.1, 48 or 96kHz sampling frequency
Image
JPG: JPEG files with 640x480 or 1280x720 resolution created
by a DR-V1HD
USB
Computer
Mini-B USB plug
NOTE
Instead of connecting the unit to a computer via USB, you can also conduct
the same operations by removing the microSD card from the unit and loading
it directly (or using a card adapter) on a computer.
CAUTIONS
USB bus power is not supported. So, batteries will be drained as usual •
when you connect the unit to a USB port.
This unit cannot be operated when connected by USB.
•
When connected, the USB connected message appears on the display
of the unit.
Make sure that the microSD card is inserted properly. If the microSD card is
not loaded properly, a “NO SDCARD” pop-up message appears.
When loaded properly, this unit appears on the computer as an external
volume named “DR-V1HD”.