Teac HS-4000 - Manual (Page 27)

TASCAM HS-4000
27
3 − Preparation
Turning the power ON and OFF
Open the front panel POWER switch cover and press the POWER
switch.
Startup screen
Home Screen
To turn the power OFF, push the POWER switch on the front
panel again.
CAUTION
Never turn the power OFF during recording, playback, or
any other operation that accesses the CF card. Doing so
could, for example, cause recording errors, loss of recorded
data, and sudden loud noises to be output through
monitoring equipment, which could result in damaged
equipment and hearing loss.
Setting the time of the built-in clock
1. Press the MENU key on the front panel to open the MENU
screen.
2. Touch the SYSTEM SETUP button to open the SYSTEM SETUP
screen.
3. Touch the CLOCK ADJUST tab to open the page where you
can set the built-in clock.
4. Touch the item that you want to change, and use the DATA
dial on the front panel to change the value.
5. Touch the SET button or push the DATA dial to confirm the
setting.
NOTE
After purchasing this unit, set the clock before making your
first recording. If you do not set the clock, the time stamps
on recorded files will not be correct.