Teac HS-4000 - Manual (Page 9)

TASCAM HS-4000
9
1 − Introduction
Thank you very much for purchasing a TASCAM HS-4000 4
Channel Audio Recorder. Please read this manual thoroughly
before using the unit so that you understand correct operating
procedures and can use its functions fully. We hope that you
enjoy using this unit for many years.
Please keep this manual so that you can read it at any time. A
digital copy of this manual can also be downloaded from our
website (http://tascam.com/)
Features
• CompactFlash cards are used as recording media (Ultra
DMA compatible)
• Two CompactFlash card slots allows two cards to be loaded
and recorded to simultaneously using dual player mode
(planned for a future firmware version upgrade)
• 4-track simultaneous recording is possible at up to 96 kHz,
24-bit sample rates
• Confidence monitoring allows simultaneous playback
of the signal as it is being recorded (when recording two
tracks at up to 44.1/48 kHz,)
• Simultaneous playback of four tracks, including two stereo
pairs (dual playlist mode)
• Three operation modes: timeline, take and playlist
• In timeline mode, linear recording and playback like a tape
recorder are possible
• In take mode, playback and flash start of takes are possible
• In playlist mode, takes can be added to a list and played
back in list order or activated using flash start
• In single playlist mode, playback of up to 4 tracks is possible
• In dual playlist mode, 2 stereo tracks can be independently
played back and controlled
• Using the ONLINE key, online playback and monitoring
playback are possible
• Broadcast Wave Format (BWF) file recording
• Flash start is possible using a TASCAM RC-HS32PD, RC–SS20
(both sold separately)
• In addition to using the remote controllers that are sold
separately, flash start is also possible using PARALLEL
control or a keyboard
• Auto cue, auto ready and incremental play functions
• Importing and exporting AES31 editing information in
timeline mode are possible
• Playlist mode (compatible with JPPA flash start playlist file
loading)
• JOG/SHUTTLE function
• Intuitive operation is possible using graphical interface on
TFT color touchscreen
• 4 channels of XLR analog balanced inputs and outputs
• 2 stereo pairs of XLR AES/EBU digital inputs and outputs
• 2 channels of XLR analog monitoring outputs
• Headphone output
• XLR time code input and output
• BNC media reference (NTSC/PAL black burst signals, and
HDTV Tri-level signals) and word clock input and output/
thru
• Compatible with 48 kHz pull-up/pull-down operation
• Copying files to connected USB memory is possible
(planned for a future firmware version upgrade)
• LAN (Gigabit Ethernet) functions allow file transmission,
remote control and observation over a network (planned
for a future firmware version upgrade)
• Parallel remote control is possible
• RS-232C serial remote control is possible (planned for a
future firmware version upgrade)
• RS-422 (9-pin serial protocol) serial remote control is
possible
• Rack mounting (2U) is possible
Included items
This product includes the following items.
Take care when opening the package not to damage the items.
Keep the package materials for transportation in the future.
Please contact the store where you purchased this unit if any of
these items are missing or have been damaged during transpor-
tation.
• Main unit (HS-4000) ................................................................................ 1
• Power cord set .......................................................................................... 1
• Rack-mounting screw kit ...................................................................... 1
• Security screws ......................................................................................... 3
• Warranty card ........................................................................................... 1
• Owner's manual (this manual)............................................................ 1
Conventions used in this manual
In this manual, we use the following conventions:
• Keys, jacks and other parts on the main unit and external
devices are indicated like this: MENU
• “CompactFlash card” is abbreviated as “CF card.”
• Additional information is provided as necessary as tips,
notes and cautions.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe special
cases.
CAUTION
Failure to follow these instructions could result in injury, damage
to equipment or lost recording data, for example.
Intellectual property rights
• TASCAM is a trademark of TEAC Corporation, registered in
the U.S. and other countries.
• CompactFlash is a US registered trademark of SanDisk
Corporation.
• Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.