Teac HS-4000 - Manual (Page 80)

80
TASCAM HS-4000
9 – Playlist mode
Loading playlists
You can load a playlist that is in the current session folder.
The folder hierarchy will be as follows when examined on a
computer.
[CF card drive name]: \ [project name] \ [session name] \
[_playlists] \ [playlist file]
NOTE
You cannot load a playlist file from a session other than the
current one.
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the e button for the project that contains the playlist
you want to load to open the session selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it.
3. Touch the e button for the session that contains the playlist
you want to load to open the playlist selection screen.
If it is not the current project, a pop-up window appears
confirming that you want to load it. Touch the OK button.
4. Select the playlist that you want to load.
5. Touch the MENU button on the Playlist selection screen to
open a pull-up menu.
Single mode
Dual or A/B MIXED mode
6. In single mode, touch the LOAD button in the pull-up menu.
When in dual mode, press the LOAD to A or LOAD to B
button to load it to the desired player.
7. Touch the OK button or press the DATA dial when a confir-
mation pop-up message appears.
Single mode
When LOAD to A button selected in dual or A/B MIXED mode
After loading completes the Home Screen opens.
NOTE
You can also touch the e button for the playlist that you
want to load.
When in single mode, the same pop-up message as above
appears. Touch the OK button or press the DATA dial.
In dual or A/B MIXED mode, touch the LOAD to A button or
LOAD to B button in the pop-up message according to the
player.