Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 105)

W e b S e r v e r I n t e r f a c e 3-75
Host Name The name of the DHCP Server. Default is none.
The DHCP Host Table screen provides the following user-activated buttons:
NOTICE: You must Save and Restart for the new Server name to become active.
Figure 3.69 DHCP Host Details Screen
Static Entry Table Screen
The Static Entry Table screen (Figure 3.70) lists static IP addresses associated
with MAC addresses. This ensures that the same IP address will always be
used for a given PC provided its MAC address is known. These parameters
are configured on the Static Entry Details screen accessed by selecting a
number from the “Entry Index” column.
Figure 3.70 Static Entry Table Screen
MAC Address MAC Address you want to associate with an IP address.
IP Address IP Address given to the DHCP client if that client has the MAC Address
defined on this screen.
Mask Mask associated with the IP Address shown on the screen.
Host Name Name given to the DHCP client.
Button Function
DHCP Details Returns the user to the previous screen.
Add New Adds a new Server name.