Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 74)

3-44 W A N s u i t e 5 3 7 0
IP Address Establishes the IP address by which the rule will filter IP traffic (if enabled).
IP Mask Represents a range of IP addresses defined so that only machines with IP
addresses within the range defined by the mask are allowed to access an
Internet service. To mask a portion of the IP address, replace it with the wild
card character “0” (zero). (For example, 192.44.0.0 represents every computer
on the Internet with an IP address beginning with 192.44.)
Filter By IP Address Enables or disables filtering of the IP traffic by the IP address specified in the
IP Address or IP Mask field.
IP Port Establishes the IP port by which the rule will filter IP traffic (if enabled). You
may enter the port value directly into this field or select a port ID from the
drop-down list to the right of the field (see next paragraph).
Filter By IP Port Enables or disables filtering of the IP traffic by the IP port specified in the IP
Port field.
Tx Alarm Threshold Specifies the threshold in octets for the Transmit Alarm on this rule.
Tx Alarm Shows the current Transmit Alarm status.
IP Port List Provides a drop-down list of well-known port IDs for TCP and UDP. To enter
a port ID, select an option from the list and click the “Enter” button. The
selected port ID value will then be reflected in the IP Port field.
Traffic Meter Statistics Screen
The Traffic Meter Statistics screen (Figure 3.35) displays a summary of the
number of frames and octets sent over a DLCI that have been counted in
accordance with the Service Aware “rule” that has been established for a
Service. As such, it is Frame Relay specific (i.e., DLCIs only occur in frame
relay links). In addition, this screen provides data rate performance
information for the period of time specified in the Period Index field (see
below). To access this screen, click on the appropriate link under the
“Statistics” column on the Service Aware screen.