Parameters to negotiate, Parameters to negotiate -27 – Verilink WANsuite 5370 (34-00310.D) Product Manual User Manual

Page 143

Advertising
background image

V T 1 0 0 I n t e r f a c e

4-27

Auth Challenge

Interval

The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.

Values: 0

3600

Default: 0 (disabled)

Allow PAP

Allows the peer to negotiate for PAP.

Values: No, Yes
Default: No

Allow CHAP

Allows the peer to negotiate for CHAP.

Values: No, Yes
Default: No

PAP Username

This field is used to log on to the peer. Type the appropriate PAP Username
in this field.

Values: (user established)
Default: Username

PAP Password

This field is used to enter the password necessary to log on to the peer under
a given PAP Username.

Values: (user established)
Default: (none)

CHAP Username

This field is used (along with the CHAP Secret) to challenge the peer. Type
the appropriate CHAP Hostname in this field.

Values: (user established)
Default: Hostname

CHAP Secret

This field is used to enter the Secret (i.e., password) necessary to challenge
the peer.

Values: (user established)
Default: Secret

Initiate Negotiation

Determines whether the port actively sends negotiation requests to the peer
site or passively waits for negotiation requests.

Values: Yes, No
Default: Yes

Parameters To Negotiate

The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by selecting the desired option. The parameters are
described in the table below.

Parameter

Description

Protocol Header
Compression

Compresses PPP protocol headers.
Default = Yes

IPCP (IP Control
Protocol)
Compression

Compresses TCP headers using Van Jacobsen compression.
Default = Yes

Advertising
This manual is related to the following products: