Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 142)

4-26 W A N s u i t e 5 3 7 0
Average Average bandwidth (in bps) used by the port.
Period Index Selects the interval (Current, Summary, or 1-96) to be viewed on the Frame
Relay Port Statistics screen.
PPP Service Details Screen
The PPP Service Details screen (Figure 4.22Figure 4.22) gives you access to
configuration parameters that can be viewed/changed as described in the
following paragraphs. To save new parameters, press the “Esc” key.
Figure 4.22 PPP Service Details Screen
ACCM The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–4294967295
Default: 4294967295
MRU The Maximum Receive Units may be set to inform the peer that the
implementation can receive larger packets, or to request that the peer send
smaller packets.
Values: 128–4096
Default: 1500
Port IP Address The IP address of the port. For unnumbered PPP link, set to 0.0.0.0 and set IP
Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP Over Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.