Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 134)

4-18 W A N s u i t e 5 3 7 0
Figure 4.16 Packet Capture Screen
Mode The two modes available are “Analyze” and “Live.” The Live mode lets you
capture data and create a usable text file of the captured data. In Analyze
mode, the packet switch will return the data via the Data Line Monitor Packet
Table, whereas in the Live mode the Data Line Monitor Packet Table will
appear empty for SNMP calls.
Buffer Management Displays whether displayed data is set to “Wrap” or “Stop on Full.”
The Data Line Monitor Service Details screen (Figure 4.17) is displayed by
selecting the appropriate Services link on the Data Line Monitor Config Table
screen. You use this screen to define the parameters listed above.
Figure 4.17 Data Line Monitor Service Details Screen