Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 25)

A b o u t t h e W A N s u i t e 5 3 7 0 1-11
Network Interface
Labeled on the rear panel of the WANsuite 5370 as NET , the Network
interface connection is a standard RJ-48C, eight-pin modular jack that
contains an automatic line build out (ALBO). The ALBO allows the unit to be
located a substantial distance away from the telco network interface with a
receive signal level to
−
49 dB. The Network LBO level cannot be set by the
user. To view the pinout assignments for this interface, refer to Network
Interface Pin Assignments on page A-8.
CAUTION: In accordance with FCC Rules, Part 68.218(b), you must notify the
telephone company prior to disconnecting this product.
Power Connection
The POWER port is an eight-pin circular mini-DIN connector that connects
either an autoranging 100–240 VAC (shown in Figure 1.3 below) or an
autoranging 18
−
150 VDC external power supply (connection shown in below
in Figure 1.4) to the unit. The WANsuite 5370 must be used with the UL
Listed/CSA Certified Class 2 power supply provided with the unit or ordered
separately from Verilink. The unit has no power switch.
NOTICE: Other power supply options are available. Refer to Power on page A-2.
Figure 1.3 WANsuite 5370 Power Supply Unit