Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 33)

W e b S e r v e r I n t e r f a c e 3-3
The Unit screen displays the following fields:
The Unit screen provides the following user-activated buttons:
Maintenance Reset Use this button to access a screen where you can perform a Maintenance
Reset (Figure 3.2). When you click on the arrow in the pull-down menu box
on the screen, you will have the option to perform a TDM, Packet, Packet 3,
or Packet 4 reset. When you select one of these options, all previous
configurations will be lost and the unit will be set back to the specified
factory default.
Field Function
Object ID Display-only field used to point an SNMP agent to this ID.
Up Time Displays the amount of time the unit has been up and running.
Contact Stores the name of a point-of-contact for system failure.
Name Read/write field that holds the unit’s name.
Location Read/write field that holds the unit's location.
FrameStart ID Read/write field that holds the unit's ID that uniquely identifies the
unit and is used in the FrameStart applications.
LCD Interface Lets the user enable or disable the LCD interface buttons of the
unit.
Blank Fields Read/write fields for user-specific labels and values. Information
resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting in
standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit's internal date setting in
standard MM/DD/YY format.
Button Function
Submit Sets any values that have been changed. The top “Submit”
button sets any unit parameters changed in the upper section of
the screen, and the lower “Submit” button sets the real-time
clock.
Maintenance Reset Resets unit to its default TDM, Packet, Packet 3, or Packet 4
configuration.
Save and Restart Saves the current configuration and restarts the unit.