Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 109)

W e b S e r v e r I n t e r f a c e 3-77
Select the TCP Connection Table to access the screen shown in Figure 3.70.
This screen lets you see which addresses and ports are in a “listening” state
and which are already established.
Figure 3.70 TCP Connection Table Screen
Click on the “TCP Host Access Table” button on the TCP Connection Details
screen to access a screen (Figure 3.71) where you can specify up to 10 IP
addresses that may access the services provided by TCP Server. If no
addresses are provided, any host can access the services provided by TCP
Server.
Figure 3.71 TCP Host Access Table Screen
You can access the Host Access Details (Figure 3.72) for a specific Index
number by clicking on the appropriate numbered link under the “Index”
column.