Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 173)

V T 1 0 0 I n t e r f a c e 4-39
To change the Username and Password for a selected PAP Index, access the
PAP Details screen (Figure 4.22) by selecting the applicable index number in
the Pap Table. Enter the new information in the appropriate field(s) and press
the “Esc” key.
Figure 4.31 PAP Details Screen
To delete the Username and Password for a selected PAP Index, delete the
character string displayed in both fields (leaving them blank) and press the
“Esc” key.
CHAP Table
From the PPP Service Details screen, select “CHAP Table” to view a table of
the CHAP Username and Secret information for each of 10 entries. This table
and its Details screen look the same as the PAP Table and Details screens.
Choose an Index number to bring up the CHAP Details screen in which you
can change the Username and Secret information for that particular CHAP
Index.
To change the Username and Secret for a selected CHAP Index, enter the new
information in the appropriate field(s) and press the “Esc” key.
SCADA Service Details Screen
NOTICE: SCADA traffic has a higher priority than other types of traffic flowing
through the unit. Refer to Normal Tx Queue Size on page 4-32 for more
details.
The SCADA Service Details screen (Figure 4.32) gives you access to the
configuration parameters described in the paragraphs listed below.