Network 1 interface pin assignments, Network 2 and network 3 interface pin assignments, Supervisory port pin assignments – Verilink WANsuite 7105 (34-00316.C) Product Manual User Manual
Page 244: Network 1 interface pin assignments or
A-10
W A N s u i t e 7 1 0 5
Network 1 Interface Pin Assignments
The
NET 1
physical interface is a standard RJ-48C, 8 -pin modular jack. The
table below displays the pinout assignments.
Network 2 and Network 3 Interface Pin Assignments
The
NET 2
and
NET 3
physical interfaces are standard RJ-48C, 8-pin modular
jacks. The table below displays the pinout assignments. A jumper option on
Networks 2 and 3 changes the pinout from a traditional DSX interface to a
Network interface.
Supervisory Port Pin Assignments
The
LOCAL
Supervisory port interface is a standard RJ-11, 6 -pin modular
jack. The table below displays the pinout assignments.
Pin
T1 NET Interface
1
Data In
2
Data In
3, 6
Not used
4
Data Out
5
Data Out
7, 8
Chassis Ground
Pin
T1 NET Interface
1
Data Out
2
Data Out
3, 6
Not used
4
Data In
5
Data In
7, 8
Chassis Ground
Pin
DCE Port
1
Rx Data in
2
Tx Data out
3
Rx Data in
4
Tx Data out
5
Signal Ground
6
not used