Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 177)

V T 1 0 0 I n t e r f a c e 4-43
Figure 4.36 Endpoint Table Screen
You can add an endpoint in the Add Endpoint field, press the “Enter” key,
and, when the screen refreshes, you will be able to view that endpoint’s
associated parameters. For most applications, you will not have to modify the
Endpoint Table and DLCI Table.
Endpoint Details Screen
Select the <NDX> number to view the Endpoint Details screen (Figure 4.37),
which provides you with access to the configuration parameters described
below.
Figure 4.37 Endpoint Details Screen
Name When the unit learns a new DLCI, it creates an endpoint entry and a DLCI
entry if they are not already configured. The endpoint’s Name will
automatically be assigned as “Dynamic”; however, this name can (and most
likely should) be changed to reflect a remote location name. Submitting a