Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 220)

4-86 W A N s u i t e 7 1 0 5
Figure 4.80 Originate Ping Screen
Dest IP Address Destination IP Address of sent Ping request messages.
Number to Send Number of Ping request messages to send.
Values: 1
−
10,000
Default: 5
Ping Size (Bytes) Number of bytes in a Ping request message.
Values: 4
−
4096 bytes
Default: 64 bytes
Ping Reply Timeout
(sec)
Number of seconds to wait for a reply to a Ping request message.
Values: 1
−
60 s
Default: 1 s
Ping Status Shows the number of pings returned versus the number requested, and
providing minimum, average, and maximum statistics.
The Originate Ping screen provides the following user-activated prompts:
Network Address Translation (NAT)
NAT is a method of connecting multiple computers to the Internet (or any
other IP network) using one IP address. This lets users cost-effectively and
efficiently connect their networks to the Internet.
Whether on a global or local port, NAT provides translation only upon receipt
of a packet, which NAT will translate, not translate, or filter, depending on
Prompt Function
Start Ping Starts sending Ping messages.
Stop Ping Stops sending Ping messages.
Reset Stats Clears all counts activity.