Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 52)

3-20 W A N s u i t e 7 1 0 5
To view details about the current condition of IP, ICMP (In and Out), TCP,
and UDP parameters, click on the “Ethernet Stats” button at the bottom of the
screen. The Ethernet Statistics screen (Figure 3.14) contains no user-selectable
fields or options; it is simply a representation of the applicable MIB II
parameters.
Figure 3.14 Ethernet Stats Screen
Click on the Unit Access Table button on the Ethernet (IP Details) screen to
view the Unit Access Table (Figure 3.15), which specifies up to 10 different
IP networks that may access the unit’s parameters. If no IP networks are
supplied, any host may access the unit. Select any Index number on the table
to view the Unit Access Details (Figure 3.16) that correspond with that Index
number.
Figure 3.15 Unit Access Table