Verilink WANsuite 7105 (34-00316.C) Product Manual - Manual (Page 23)

A b o u t t h e W A N s u i t e 7 1 0 5 1-9
• Management Interfaces:
• WANsight
−
an innovative, embedded Web-based user interface for
remote configuration and real-time reporting via Web browser (Verilink
recommends Microsoft Internet Explorer 5.0 or higher) that decreases
installation and configuration time for service employees, simplifies
troubleshooting and fault isolation of network problems, and optimizes
management of both TDM and frame-based services
• VT100 or TELNET
• Local Supervisory port
• Ethernet port for management or IP routing
• Frame Relay Aware:
• Support for leased-line and frame relay services
• Layer 2 end-to-end visibility and control
• Embedded frame relay test set
• Layer 3 support for visibility beyond the Network layer (up to 25
protocols)
• “Top Talker” reports
−
lets you find out who’s generating the most IP
traffic on your LAN
Front Panel
The front panel of the WANsuite 7105 application module (Figure 1.1)
provides the following:
• Six LED status indicators
• A local RJ-11 Supervisory port
• Three sets of Bantam jacks for diagnostics
• Ejector handles for installing the module in a shelf slot
Figure 1.1 Front Panel of WANsuite 7105