H3C Technologies H3C S12500 Series Switches - Manual (Page 372)

356
Task Remarks
Advertising a default route to an IPv6 peer or peer
group
Optional.
Configuring outbound route filtering Optional.
Configuring inbound route filtering
Optional.
Ignoring the ORIGINATOR_ID attribute of IPv6 BGP
routes
Configuring IPv6 BGP and IGP route
synchronization
Optional.
Configuring route dampening Optional.
Configuring IPv6 BGP route
attributes
Configuring IPv6 BGP preference and default
LOCAL_PREF and NEXT_HOP attributes
Optional.
Configuring the MED attribute Optional.
Configuring the AS_PATH attribute Optional.
Tuning and optimizing IPv6
BGP networks
Configuring IPv6 BGP timers Optional.
Configuring IPv6 BGP soft reset Optional.
Enabling the IPv6 BGP ORF capability Optional.
Enabling 4-byte AS number suppression Optional.
Configuring the maximum number of ECMP routes Optional.
Enabling MD5 authentication for TCP connections Optional.
Applying an IPsec policy to an IPv6 BGP peer or
peer group
Optional.
Configuring a large scale IPv6
BGP network
Configuring IPv6 BGP peer group Optional.
Configuring IPv6 BGP community Optional.
Configuring an IPv6 BGP route reflector Optional.
Configuring 6PE
Configuring basic 6PE capabilities Optional.
Configuring optional 6PE capabilities Optional.
Configuring BFD for IPv6 BGP Optional.
Configuring basic IPv6 BGP
Configuration prerequisites
Before you configure basic IPv6 BGP, complete the following tasks:
• Specify IP addresses for interfaces.
• Enable IPv6 with the ipv6 command in system view.