Logging ipv6 peer or peer group state changes – H3C Technologies H3C S12500 Series Switches User Manual
Page 375
359
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp as-number
N/A
3.
Enter IPv6 address family view.
ipv6-family
N/A
4.
Allow the establishment of EBGP
connection to an indirectly connected peer
or peer group.
peer { group-name |
ipv6-address } ebgp-max-hop
[ hop-count ]
Not configured by
default.
Configuring a description for an IPv6 peer or peer group
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp as-number
N/A
3.
Enter IPv6 address family view
or IPv6 BGP-VPN instance
view.
ipv6-family [ vpn-instance
vpn-instance-name ]
N/A
4.
Configure a description for an
IPv6 peer or peer group.
peer { group-name | ipv6-address }
description description-text
Optional.
Not configured by default.
The IPv6 BGP-VPN instance
view does not support the
group-name argument.
The peer group to be
configured with a description
must have been created.
Disabling session establishment to an IPv6 peer or peer group
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp as-number
N/A
3.
Enter IPv6 address family view.
ipv6-family
N/A
4.
Disable session establishment to an
IPv6 peer or peer group.
peer { group-name | ipv6-address }
ignore
Not disabled by default.
Logging IPv6 peer or peer group state changes
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp as-number
N/A