Saving updates – H3C Technologies H3C S5560 Series Switches User Manual
Page 267
251
Step Command
Remarks
3.
Enable BGP route refresh for a
peer or peer group.
•
Enable BGP route refresh for the
specified peer or peer group:
peer { group-name |
ipv6-address [ prefix-length ] }
capability-advertise
route-refresh
•
Enable BGP route refresh and
multi-protocol extension
capability for the specified peer
or peer group:
undo peer { group-name |
ipv6-address [ prefix-length ] }
capability-advertise
conventional
By default, BGP route refresh and
multi-protocol extension capability
are enabled.
Saving updates
To save all route updates from the specified peer or peer group (IPv4):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view or BGP-VPN
instance view.
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a.
bgp as-number
b.
ip vpn-instance
vpn-instance-name
N/A
3.
Enter BGP IPv4 unicast
address family view or
BGP-VPN IPv4 unicast
address family view.
address-family ipv4 [ unicast ]
N/A
4.
Save all route updates from
the peer or peer group.
peer { group-name | ip-address
[ mask-length ] } keep-all-routes
By default, the routes are not
saved.
This command takes effect only for
the routes received after this
command is executed.
To save all route updates from the specified peer or peer group (IPv6):
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view
bgp as-number
N/A
3.
Enter BGP IPv6 unicast
address family view.
address-family ipv6 [ unicast ]
N/A