Displaying and maintaining ospfv3 – H3C Technologies H3C S5560 Series Switches User Manual

Page 401

Advertising
background image

385

Step Command

Remarks

3.

Enter OSPFv3 area view.

area area-id

N/A

4.

Apply an IPsec profile to a
virtual link.

vlink-peer router-id [ dead seconds | hello
seconds | instance instance-id | retransmit

seconds | trans-delay seconds |
ipsec-profile profile-name ] *

By default, no IPsec profile is
applied.

To apply an IPsec profile to a sham link:

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enter OSPFv3 view.

ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *

N/A

3.

Enter OSPFv3 area view.

area area-id

N/A

4.

Apply an IPsec profile to a

sham link.

sham-link source-ipv6-address
destination-ipv6-address
[ cost cost | dead
dead-interval | hello hello-interval |

instance instance-id | ipsec-profile

profile-name | retransmit retrans-interval |
trans-delay delay ] *

By default, no IPsec profile is
applied.

Displaying and maintaining OSPFv3

Execute display commands in any view and reset commands in user view.

Purpose Command

Display information about the routes to
OSPFv3 ABR and ASBR.

display ospfv3 [ process-id ] abr-asbr

Display summary route information on
the OSPFv3 ABR.

display ospfv3 [ process-id ] [ area area-id ] abr-summary
[ ipv6-address prefix-length ] [ verbose ]

Display summary route information on
the OSPFv3 ASBR.

display ospfv3 [ process-id ] asbr-summary [ ipv6-address
prefix-length ] [ verbose ]

Display OSPFv3 process information.

display ospfv3 [ process-id ] [ verbose ]

Display OSPFv3 GR information.

display ospfv3 [ process-id ] graceful-restart [ verbose ]

Display OSPFv3 interface information.

display ospfv3 [ process-id ] interface [ interface-type
interface-number
| verbose ]

Display OSPFv3 LSDB information.

display ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix |
inter-router | intra-prefix | link | network | nssa | router |

unknown [ type ] } [ link-state-id ] [ originate-router router-id |

self-originate ] | statistics | total | verbose ]

Display OSPFv3 next hop information. display ospfv3 [ process-id ] nexthop

Display OSPFv3 neighbor information.

display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type
interface-number
] [ verbose ] | peer-router-id | statistics ]

Advertising
This manual is related to the following products: