H3C Technologies H3C S5560 Series Switches User Manual

Page 311

Advertising
background image

295

[SwitchC-bgp] peer 195.1.1.1 as-number 200

[SwitchC-bgp] address-family ipv4 unicast

[SwitchC-bgp-ipv4] peer 193.1.1.1 enable

[SwitchC-bgp-ipv4] peer 195.1.1.1 enable

[SwitchC-bgp-ipv4] quit

[SwitchC-bgp] quit

# Configure Switch D.

[SwitchD] bgp 200

[SwitchD-bgp] peer 194.1.1.2 as-number 200

[SwitchD-bgp] peer 195.1.1.2 as-number 200

[SwitchD-bgp] address-family ipv4 unicast

[SwitchD-bgp-ipv4] peer 194.1.1.2 enable

[SwitchD-bgp-ipv4] peer 195.1.1.2 enable

[SwitchD-bgp-ipv4] quit

[SwitchD-bgp] quit

4.

Configure local preference for route 1.0.0.0/8, making Switch D give priority to the route learned

from Switch C:
# Define an ACL numbered 2000 on Switch C, permitting route 1.0.0.0/8.

[SwitchC] acl number 2000

[SwitchC-acl-basic-2000] rule permit source 1.0.0.0 0.255.255.255

[SwitchC-acl-basic-2000] quit

# Configure a routing policy named localpref on Switch C, setting the local preference of route

1.0.0.0/8 to 200 (the default is 100).

[SwitchC] route-policy localpref permit node 10

[SwitchC-route-policy-localpref-10] if-match ip address acl 2000

[SwitchC-route-policy-localpref-10] apply local-preference 200

[SwitchC-route-policy-localpref-10] quit

# Apply routing policy localpref to routes from peer 193.1.1.1.

[SwitchC] bgp 200

[SwitchC-bgp] address-family ipv4 unicast

[SwitchC-bgp-ipv4] peer 193.1.1.1 route-policy localpref import

[SwitchC-bgp-ipv4] quit

[SwitchC-bgp] quit

# Display the BGP routing table on Switch D.

[SwitchD] display bgp routing-table ipv4

Total number of routes: 2

BGP local router ID is 195.1.1.1

Status codes: * - valid, > - best, d - dampened, h - history,

s - suppressed, S - stale, i - internal, e - external

Origin: i - IGP, e - EGP, ? - incomplete

Network NextHop MED LocPrf PrefVal Path/Ogn

* >i 1.0.0.0 193.1.1.1 200 0 100i

* i 192.1.1.1 100 0 100i

Advertising
This manual is related to the following products: