Verifying the configuration – H3C Technologies H3C S5560 Series Switches User Manual

Page 38

Advertising
background image

22

# Configure a static route on Switch B, and specify VLAN-interface 101 as the backup output

interface and 24.24.24.2 as the backup next hop.

<SwitchB> system-view

[SwitchB] bfd echo-source-ip 3.3.3.3

[SwitchB] ip route-static 1.1.1.1 32 vlan-interface 200 13.13.13.1

backup-interface vlan-interface 101 backup-nexthop 24.24.24.2

{

(Method 2.) Configure static route FRR to automatically select a backup next hop:
# Configure static routes on Switch A, and enable static route FRR.

<SwitchA> system-view

[SwitchA] bfd echo-source-ip 4.4.4.4

[SwitchA] ip route-static 4.4.4.4 32 vlan-interface 200 13.13.13.2

[SwitchA] ip route-static 4.4.4.4 32 vlan-interface 100 12.12.12.2 preference 70

[SwitchA] ip route-static fast-reroute auto

# Configure static routes on Switch B, and enable static route FRR.

<SwitchB> system-view

[SwitchB] bfd echo-source-ip 1.1.1.1

[SwitchB] ip route-static 1.1.1.1 32 vlan-interface 200 13.13.13.1

[SwitchB] ip route-static 1.1.1.1 32 vlan-interface 101 24.24.24.2 preference 70

[SwitchB] ip route-static fast-reroute auto

3.

Configure static routes on Switch C.

<SwitchC> system-view

[SwitchC] ip route-static 4.4.4.4 32 vlan-interface 101 24.24.24.4

[SwitchC] ip route-static 1.1.1.1 32 vlan-interface 100 12.12.12.1

Verifying the configuration

# Display route 4.4.4.4/32 on Switch A to view the backup next hop information.

[SwitchA] display ip routing-table 4.4.4.4 verbose

Summary Count : 1

Destination: 4.4.4.4/32

Protocol: Static Process ID: 0

SubProtID: 0x0 Age: 04h20m37s

Cost: 0 Preference: 60

Tag: 0 State: Active Adv

OrigTblID: 0x0 OrigVrf: default-vrf

TableID: 0x2 OrigAs: 0

NibID: 0x26000002 LastAs: 0

AttrID: 0xffffffff Neighbor: 0.0.0.0

Flags: 0x1008c OrigNextHop: 13.13.13.2

Label: NULL RealNextHop: 13.13.13.2

BkLabel: NULL BkNextHop: 12.12.12.2

Tunnel ID: Invalid Interface: Vlan-interface200

BkTunnel ID: Invalid BkInterface: Vlan-interface100

# Display route 1.1.1.1/32 on Switch B to view the backup next hop information.

[SwitchB] display ip routing-table 1.1.1.1 verbose

Advertising
This manual is related to the following products: