Ip gateway specifications, General specifications, Layer 2/3 protocols – Grass Valley NV8500 Series v.3.5 User Manual
Page 226: General specifications layer 2/3 protocols

210
IP Gateway Specifications
IP Gateway Specifications
General Specifications
Layer 2/3 Protocols
Parameter
IP Gateway Input Cards
IP Gateway Output Cards
SDI video channels
8
8
10GbE ports
3
3
10/100M control ports
1
1
MAC address
One for the 10/100 control port, plus three for the 10GbE ports flashed onto
front module
IP addresses, 10/100
One for the control port, flashed into rear module. (The default IP address
for the control port is 192.168.3.sss where sss is the slot number for the IP
gateway card.)
IP addresses, 10GbE
Statically-assigned via custom GUI served up by the 10/100 control port
Network protocols
Address Resolution Protocol (ARP)
ICMP response only
Address Resolution Protocol (ARP)
ICMP response only
SDI channel assignments
to 10GbE ports
10GbE #1: Ch. 1–3
10GbE #2: Ch. 4–6
10GbE #3: Ch. 7–8
10GbE #1: Ch. 1–3
10GbE #2: Ch. 4–6
10GbE #3: Ch. 7–8
SFPs for 10GbE ports
Supports SFP+ (supplied by Grass Valley)
10GbE rate
10.3125 Gb/s, ± 100 ppm
10GbE standard
IEEE 802.3-2008
SDI formats
480i/29.97, 576i/25, 1080i/29.97, 1080i/25, 1080i/30, 720p/59.94, 720p/50,
720p/60, 1080p/59.94A, 1080p/50A, 1080p/60A
1080p/59.94B-DL, 1080p/50B-DL, 1080p/60B-DL, 1080i/29.97B-DS, 1080i/
25B-DS, 1080i/30B-DS
1080psf/29.97, 1080psf/24, 1080psf/25, 1080psf/30, 1080psf/23.98
SMPTE SDI standards
SMPTE 259M, 292M, 424M
SMPTE IP standards
SMPTE 2022-6
Parameter
IP Gateway Input Cards
IP Gateway Output Cards
VLAN tagging
No addition of VLAN tag words to header
ARP
Yes, MAC address resolution to IP addresses
ARP transmission
Broadcast
Unicast response
ARP Interval
Programmable, default = 1s
n/a
IEEE 1588
Not in this release
IP Filtering
Yes, destination IP address filtering only
Video clock recovery
Yes, used for video clock regeneration on asynchronous streams SMPTE
2022-6 time stamps