HEIDENHAIN TNC 320 (340 55x-04) Cycle programming - Manual (Page 139)

HEIDENHAIN TNC 320 139
5.4 SL
O
T
MILLING (Cy
c
le 253, DIN/ISO: G253)
U Depth Q201 (incremental): Distance between
workpiece surface and bottom of slot. Input range
–99999.9999 to 99999.9999
U Plunging depth Q202 (incremental): Infeed per cut.
Enter a value greater than 0. Input range 0 to
99999.9999
U Finishing allowance for floor Q369 (incremental):
Finishing allowance in the tool axis. Input range 0 to
99999.9999
U Feed rate for plunging Q206: Traversing speed of
the tool while moving to depth in mm/min. Input
range: 0 to 99999.999; alternatively FAUTO, FU, FZ
U Infeed for finishing Q338 (incremental): Infeed per
cut. Q338=0: Finishing in one infeed. Input range 0 to
99999.9999
X
Z
Q201
Q206
Q202
Q338