HEIDENHAIN TNC 320 (340 55x-04) Cycle programming - Manual (Page 5)

HEIDENHAIN TNC 320 5
TNC Model, Sof
tw
a
re
and F
eat
ur
es
Software options
The TNC 320 features various software options that can be enabled by
your machine tool builder. Each option is to be enabled separately and
contains the following respective functions:
Hardware options
Additional axis for 4 axes and open-loop spindle
Additional axis for 5 axes and open-loop spindle
Software option 1 (option number #08)
Cylinder surface interpolation (Cycles 27, 28 and 29)
Feed rate in mm/min for rotary axes: M116
Tilting the machining plane (plane functions, Cycle 19 and 3D-ROT
soft key in the Manual Operation mode)
Circle in 3 axes with tilted working plane