HEIDENHAIN TNC 320 (340 55x-04) Cycle programming - Manual (Page 89)

HEIDENHAIN TNC 320 89
3.1
1
Pr
ogr
amming Examples
Example: Using drilling cycles in connection with PATTERN DEF
The drill hole coordinates are stored in the
pattern definition PATTERN DEF POS and are called
by the TNC with CYCL CALL PAT:
The tool radii are selected so that all work steps
can be seen in the test graphics.
Program sequence
„ Centering (tool radius 4)
„ Drilling (tool radius 2.4)
„ Tapping (tool radius 3)
0 BEGIN PGM 1 MM
1 BLK FORM 0.1 Z X+0 Y+0 Z-20 Definition of workpiece blank
2 BLK FORM 0.2 X+100 Y+100 Y+0
3 TOOL CALL 1 Z S5000 Call the centering tool (tool radius 4)
4 L Z+10 R0 F5000 Move tool to clearance height (enter a value for F)
The TNC positions to the clearance height after every cycle
5 PATTERN DEF Define all drilling positions in the point pattern
POS1( X+10 Y+10 Z+0 )
POS2( X+40 Y+30 Z+0 )
POS3( X+20 Y+55 Z+0 )
POS4( X+10 Y+90 Z+0 )
POS5( X+90 Y+90 Z+0 )
POS6( X+80 Y+65 Z+0 )
POS7( X+80 Y+30 Z+0 )
POS8( X+90 Y+10 Z+0 )
X
Y
20
10
100
100
10
90
90 80
30
55
40
65
M6