1 n.o. contact instruction (noc) – Yaskawa Ladder Works Programming Manual User Manual
Page 7
Advertising
1.1 N.O. Contact Instruction (NOC)
1-2
1.1 N.O. Contact Instruction (NOC)
[Outline]
The NOC sets the value of the bit output to ON if the value of the referenced register is 1(ON) and to
OFF is the value of the referenced register is 0 (OFF).
[Format]
Symbol : NOC
Full Name : NO Contact
Category : RELAY
Icon :
[Parameter]
Parameter Name
Setting
Relay No.
· Any bit type register
· Any bit type register with subscript
[Program Example]
When MW000100 becomes ON, MB000101 becomes ON.
MB000100
ON
OFF
MB000101
ON
OFF
Advertising