Linkskey LKV-IPM01 - Manual (Page 17)

KLE User Guide R1.2
1. Adjust the pointer speed slide bar to the slowest (leftmost) position.
Click OK.
The mouse setting page on different Windows platforms might be quite different, some gives mouse
acceleration option and some don’t. If you see any mouse acceleration option, please uncheck it. If there is
no mouse acceleration available on the setting page, you can adjust the mouse speed slide bar to either x1 or
the slowest position (such as on Linux platforms). But sometimes, it requires a middle position on the speed
slide bar to make mouse synchronization on the viewer side, for example, Windows XP requires a middle
position on mouse speed. Anyway, the worst case is that you have to make some trial and error to make your
mouse acceleration off and the speed as x 1 (could be at the slowest position or the middle position).
2.3 More Tips for Server Desktop
Configuration
There are several aspects that have to be taken into consideration and maybe
configured on your computers or servers for best performance:
(1) Resolution modes should refrain from too much peculiarity and better
adopt ones that are within KLE’s standard support.
(2) Turn off the Menu special transition effects on your operating system
(especially on Windows XP, if you are using any) such as fade for best
video refreshing effect, especially when you are using Medium or Low
Video Quality as your video filter setting on KLE.
(3) Adjust the server desktop backgrounds as containing preferably plain,
solid colors with simple designs (only for improving video refreshing
speed when bandwidth is critically limited. No need to do so when
bandwidth is ample)
Configure Display Resolution on your Server
- - 13