Linkskey LKV-IPM01 - Manual (Page 92)

KLE User Guide R1.2
Emergency Reboot
In most of the cases, you don’t need to use this emergency reboot button to restart
your KLE. Normally, you should use the Apply Settings button on the Apply Settings
Page for almost all the cases of restarting/rebooting KLE with new settings. However,
if you find the Apply Setting button could not bring the KLE to a restart that works
properly with the viewer, you can then try to use the Emergency Reboot button here.
But as a rule of thumb, you should try the Apply Settings button first, before you try
the Emergency Reboot button.
The Emergency Reboot button will boot the KLE system completely from ground
level up, and thus will take a longer time than when you hit the Apply Settings
button. Thus before making new viewer connections, you should wait at least 1
minute to wait the KLE system to boot up completely to normal function.
- - 88