Linkskey LKV-IPM01 - Manual (Page 55)

KLE User Guide R1.2
4.5 Video Server – Miscellaneous Settings
for Video Servers
After any setting change, click the Submit button to save new setting to the KLE database, and then click
Apply Setting to apply new settings to KLE immediately.
Default Settings
Filter
Specify the Video Filter Level for the KLE video server.
Based on the bandwidth availability, you can select one of the three modes of video fileter levels:
High Quality, Low Video
Medium Quality, Low Speed
Low Quality, High Speed
Each of the three video filter levels is adapted to different combination of video quality and bandwidth
requirements. Users can select their preference according to actual video quality preference and network
bandwidth availability. However, there’s always a trade off between video quality and response speed when
under limited network bandwidth availability.
High Quality, Low Speed (Light Filter): - This level is recommended for ample bandwidth networking
condition such as LAN or broadband internet. With this setting, the viewer screen will be updated on
minimum amount of video change. This setting will require more bandwidth than the other two filter levels
and video refresh speed will be slower (however, only noticeable when bandwidth is very limited). This filter
provides the best image quality.
- - 51