Linkskey LKV-IPM01 - Manual (Page 62)

KLE User Guide R1.2
To add a new video mode, just enter a new video mode in the Select a Video
Mode field, and then enter all the parameters here below:
Refresh rate: Refresh rate of the target video mode.
Screen Width: Screen width of the target video mode.
Total Width: specifies the total screen width of the target video mode.
Hsync Start: specifies where the horizontal synchronization should start.
Screen Height: specifies the screen height of the target video mode.
Total Height: specifies the total screen height of the target video mode.
Vsync start: specifies where the vertical synchronization should start.
To change these parameters, you should follow VESA standard specifications in order for the video
capture function of KLE to work properly.
Write New Settings
Just click the Submit button to write new setting to your video mode database.
Suppress the selected video mode
To eliminate the target video mode from the video mode database, click the
Suppress button. Normally, one does not have to suppress a screen definition.
Restore previous settings
To undo the previous one addition or elimination of a video mode, just click the
Restore button. Note that you can only undo previous one move.
The following diagram explains about the all these parameters in geometric relations
to a formation of a video mode….
- - 58