Linkskey LKV-IPM01 - Manual (Page 88)

KLE User Guide R1.2
No Password
Global Password
User Password
No Password – the viewer will prompt you for no password. Anyone who is with the viewer
and passes the security level check of the viewer, could well establish the connection.
Global Password – the viewer will prompt you for a global password, which is used by all who
want to make viewer connections to KLE.
User Password – the viewer will prompt you with user-specific password. With this setting,
each login user will be checked against his or her corresponding password before allowing
viewer connection.
Global user password : Here you should enter the password that is used when the
global user password setting is enabled as your active password policy.
There are altogether nine possible combinations of Viewer Security Levels + Password Policies that are
available for a flexibility to adapt to your security needs.
Please note: Either Password or Security (SSL/PKI authentication) settings should be used with due
precaution since anyone with a viewer and knowledge of the access IP and port number of
KLE can
establish a remote connection, if
KLE connection is set at No Password and no SSL / no PKI
authentication (Viewer connection security - Level 1). With these settings, there will be no password
protection and no encryption for data transmission over the viewer connection. Unless you have taken
other proper security measures or you simply have no security concern, these “unsafe settings” is not
suggested for critical/sensitive remote connection across internet.
- - 84